יום שישי, 7 ביוני 2013

מדריך: שינוי עוצמות שמע בסמארטפונים סיניים מבוססי MTK

לעתים המכשירים שמקבלים מסין לא מכוונים היטב בעוצמות השמע. יש כאלה שהצלצול שלהם חלש מדי, יש כאלה שבקושי שומעים במיקרופון, ולפעמים הרמקול בדיבורית חלש מדי.
שימו לב, יש מעט הבדלים בין המכשירים השונים.
כדי לסדר את הבעיות ראשית ניכנס למצב מהנדס דרך האפליקציה mobileuncle  או בחיוג *#*#3646633#*#*
נלחץ על audio (ב-6589 נגלול ימינה, עד התפריט hardware testing).

MODE: כדי לשנות את הווליום הרגיל ניכנס לnormal mode. כדי לשנות את הרמקול, ניכנס לloudspeaker mode.
יש כמה סעיפים.

type משפיע על מה אנחנו משנים:
כדי לשנות את עוצמת הצלצול, נשנה את ring. כדי לשנות את עוצמת הדיבורית, נשנה את sph וsph2.
mic משפיע על רגישות המיקרופון, אפשר להוריד אותה אם הצד השני שומע הד.
media משפיע על ניגון מדיה, כמו מוזיקה וסרטונים.

level הוא רמת העוצמה שאנחנו רוצים לשנות לה את ההגדרה. העוצמות הן בין 0 ל- 6, אלה רמות העוצמה שאנחנו עוברים ביניהן ע"י כפתורי הווליום בטלפון. אפשר לקבוע ערך לכל רמה, בדרך כלל מ0 עד 255, או 0-160.
יש גם ערך max volume, עד 160. הוא אחד לכל הmode (ובחלק מההגדרות אי אפשר לשנות אותו).


אז מה עושים בתכלס?
בוחרים mode, למשל loudspeaker mode.
עכשיו בוחרים type, למשל Ring לשינוי עוצמת הצלצול.
בוחרים רמה, למשל level 6 לשינוי עוצמת הצלצול כשהטלפון מכוון על הווליום הגבוה ביותר.
משנים את המספר, למשל ל-255 כדי לשנות לעוצמה המקסימלית. לוחצים SET.
משנים את הmax, למשל ל-160, שזו העוצמה המקסימלית. לוחצים SET.


שימו לב, הגברה של הרמקול למקסימום יכולה לגרום לו נזקים, לפחות בטווח הארוך. תגבירו מעט ותבדקו אם המצב יותר טוב. אם אתם שומעים זמזומים, כנראה שהגעתם לווליום גבוה מדי.

26 תגובות:

  1. היי ניר קניתי סמארטפון סיני ונכנסתי למה שאמרת אבל לא הצלחתי לשנות את רמת השמיעה ל 6 יש אפשרות שתשאיר לי מספר שלך ואתקשר אליך אולי תוכל לעזור לי זה ממש יעזור לי לתקן את השמע הנמוך במכשיר שקניתי תודה.

    השבמחק
  2. אותו דבר קרה לי בידיוק אני נכנס להגדרות משנה אבל זה פשוט לא שומר ולא משנה כלום בווליום

    השבמחק
  3. בוחרים בloudspeaker mode (כי זה מה שבדרך כלל בעייתי)
    בוחרים type, למשל ring לשינוי עוצמת צלצול.
    בוחרים level, בדרך כלל אנחנו רוצים לשנות את הרמה של הווליום המקסימלי, אז נבחר את 6.
    משנים את המספר ל-255 או 160 (או קצת פחות מזה אם זה עושה זמזומים)
    ולוחצים על SET.

    השבמחק
  4. זה בידיוק מה שעשיתי. הקטע הוא שבעצם לא משתנה כלום ברגע שאני משנה את המספר ואז כשאני יוצא ונכנס שוב לקטגוריה המספר חוזר חזרה.
    תודה בכל מקרה, המדריכים שלך עוזרים לי רצח...

    השבמחק
  5. היי ניר, הרשה לי להצטרף לחבריי כאן יש לי גם טלפון: http://www.tinydeal.com/feiteng-h7189-55-mtk6589-4-core-android-42-gps-phone-p-96831.html

    ואיני מצליח לא רק לשנות ווליום אלא גם לסדר את ה GPS וכל אלה הדבר היחידי שהצלחתי הוא לסדר את הגלישה הסלולארית בעזרתך. כל השאר כמו שחבריי אמרו כאן זה לא שומר ולא עושה SET תוכל להסביר, לפרט, לעזור? אני חייב עזרה אני די מבואס..

    תודה ולילה טוב מקווה לשמוע ממך..

    השבמחק
  6. אתה בטוח שזה לא שומר?
    כשאתה נכנס שוב לאותו MODE, לאותה קטגוריה *ובוחר באותו level* יש מספר אחר ממה שקבעת?

    השבמחק
  7. עשיתי את זה והגברתי, ואני לא סגור אם זה הגביר. נראה לי שכן, בקצת. לא הגברתי פול ווליום, אבל הגברתי במספר משמעותי. מעניין אם יש למישהו מספרים אידיאלים, כדי לא לדפוק את האפרכסת.

    השבמחק
  8. שלום לכולם, הנה מדריך מפורט יותר המתאר כיצד לשנות את הוויליום במכשירים סיניים.
    המדריך מתורגם מרוסית לאנגלית. תודה ל-Snok מפורום iandroid. :)

    Go to AUDIO. Drop-down list :

    1.1. Normal Mode ( Normal Mode)
    1.2. Headset Mode ( Mode Headset )
    1.3. LoudSpeaker Mode - Setting the speaker (the one Handfree mode?)
    1.4. Speech Enhancement ( Improvement of speech)
    1.5. Debug Info ( debug information )
    1.6. Speech Logger ( logging of conversations , apparently ) .
    1.7. Audio logger- is an audio logger (software for recording audio) with the ability to quickly find , play and save .
    2 . Select the mode you want.
    Normal Mode, ( if you want to increase the volume of the earpiece and microphone) .
    You 'll see a menu with four positions , where the first item is the number of the profile .
    *** NO FIR Selected ***
    In the drop down menu drop down list :
    FIR 0 ~ 5
    Type
    2.1. Sip Tone (?)
    2.2. Microphone ( Microphone volume )
    2.3 . Speech ( speaker volume )
    2.4. Side Tone (?)
    2.5. Media ( media volume )
    Level 0 ~ 6
    Value is 0 ~ 255 (0 ~ 160 )
    Max Vol. 0 ~ 160
    We reserve FIR 0 and do not touch it. We go to the following options below .
    First, set up a total volume modulation .
    Choose a Type: Media
    then in the section below Max Vol. 0 ~ 160 expose the volume to 160 and click Set.
    Next, choose the parameter values for the speaker volume Vol .
    Choose a Type: Sph
    Next, a list of Level - this is the signal levels . To be clear - there is 7 levels , and each corresponds to a " clique " volume rocker , which side of the phone . Poluzuyas when speaking of the rocker you are essentially loops through these signal levels . That is, Level 0 is the most "silent " position rocker , Level 6 - very " loud" .
    Volume level for each Level is in a cell Value is ( 0 ~ 160):
    And it should be changed. Changed easily - erase the old value , enter the new and press the Set ( next to the cell ) .
    Caution ! Record the serial number before changing !
    Level 0 - 90 Set
    Level 1 - 100 Set
    Level 2 - 110 Set
    Level 3 - 120 Set
    Level 4 - 130 Set
    Level 5 - 140 Set
    Level 6 - 160 Set
    The values of the parameter Max Vol. 0 ~ 160 we have already changed earlier.

    Volume during a conversation ( a microphone )

    To adjust the microphone volume - Choose Type: Mic.
    The parameter values for the microphone volume Vol .
    Caution ! Record the serial number before changing !
    Level 0 - 255 Set
    Level 1 - 255 Set
    Level 2 - 255 Set
    Level 3 - 240 Set
    Level 4 - 240 Set
    Level 5 - 230 Set
    Level 6 - 220 Set
    After that, I began to hear better.
    What changes would take effect on the phone to do a restart ( reboot) removing the batteries.
    More than in any items do not have to climb . I just helped the decision. Perhaps you have a valid values will be different numbers.

    Now for the Speech Enchancement, on forums kitayfonam for clarity of speech advised to change the following settings : Speech Enchancement to choose - Normal Mode, Parameter 6 , the value changed from 400 to 1. I honestly did not feel the difference , can you hearing more music and you will notice a difference , maybe just for my model needs to be changed other Parametr. Still an interesting option Speech Enchancement and costs tinker with it . Maybe those who have achievements . I did not help that decision.

    Raise the volume of the sound recording when shooting video - Engineering Menu > audio> loud speaker mode> mic - the value of 160 ( for me) change on ALL 7 level ...at - 255 with confirmation (set). Reboot the device and try


    המשך בתגובה הבאה.

    השבמחק
  9. המשך מהתגובה הקודמת...

    AUDIO looking for in the list and go .
    Eran will appear on the new list :

    1.1. Normal Mode ( Normal Mode)
    1.2. Headset Mode ( Mode Headset )
    1.3. LoudSpeaker Mode - Setting the speaker (the same one Speakerphone )
    1.4. Speech Enhancement ( Improved frequency response )
    1.5. Debug Info ( debug information )
    1.6. Speech Logger

    2 . We choose the desired mode .

    Normal Mode ( phone as normal ear during a conversation )

    You 'll see a menu with three positions , where the first item is the number of the profile .

    FIR 0-5
    We reserve FIR 0 and do not touch it. We go to the following options below .

    Type
    1. Microphone ( Microphone volume )
    2 . Sph ( speaker volume )
    3 . Sid ( not specified)
    4 . Media ( volume when playing multimedia)

    Level ( levels)
    Level from 0 to 6
    Each level corresponds to a " clique " volume rocker .

    The values for each level
    Value from 0 to 255
    Max Vol. from 0 to 160

    Caution ! Record the serial number before changing !
    The changes to take effect, do not need to restart ( reboot)
    and even more so to take out the battery.
    Recording parameters and their immediate application to pressing the button SET.
    (Unfortunately this only happens on the firmware LeWa).
    On the ICS firmware to do reboot to apply the changes

    First, set up the microphone volume.
    We choose in the field Type: Mic ( microphone volume )
    Write the new values for each level
    ( The error can be up to you + -5 to my values. This is not that important )
    Level 0 - 190 -> Set
    Level 1 - 200 -> Set
    Level 2 - 220 -> Set
    Level 3 - 230 -> Set
    Level 4 - 240 -> Set
    Level 5 - 250 -> Set
    Level 6 - 255 -> Set
    After that, I really began to hear better. By the way under the same parameters pretty well
    is written in the voice recorder, and when shooting video .

    Choose a Type: Sph ( speaker volume )
    Further, all as in the previous case with the microphone .
    Changed easily - erase the old value , enter the new and press the Set ( next to the cell ) .
    Caution ! Record the serial number (imei) before changing !
    Level 0 - 60 -> Set
    Level 1 - 110 -> Set
    Level 2 - 120 -> Set
    Level 3 - 130 -> Set
    Level 4 - 140 -> Set
    Level 5 - 150 -> Set
    Level 6 - 160 -> Set
    The values of the parameter Max Vol. 0 ~ 160 we have already changed earlier.

    המשך בתגובה הבאה....

    השבמחק
  10. המשך מהתגובה הקודמת....


    We choose in the field Type: Media ( volume when playing multimedia)
    Then the section below Max Vol. 0 ~ 160 exhibiting maximum volume of 160 and click Set.
    Further, all as in the previous cases,
    Select the parameter Value
    Caution ! Record the serial number before changing !
    Level 0 - 60 Set
    Level 1 - 110 Set
    Level 2 - 120 Set
    Level 3 - 130 Set
    Level 4 - 140 Set
    Level 5 - 150 Set
    Level 6 - 160 Set

    Next, I will describe in detail the way each mode . But the important point will touch .
    We leave to the previous menu and choose
    Headset Mode ( Mode Headset )
    Choose a Type: Mic
    Level 0 - 190 -> Set
    Level 1 - 200 -> Set
    Level 2 - 220 -> Set
    Level 3 - 230 -> Set
    Level 4 - 240 -> Set
    Level 5 - 250 -> Set
    Level 6 - 255 -> Set

    Choose a Type: Sph
    Level 0 - 60 -> Set
    Level 1 - 110 -> Set
    Level 2 - 120 -> Set
    Level 3 - 130 -> Set
    Level 4 - 140 -> Set
    Level 5 - 150 -> Set
    Level 6 - 160 -> Set

    Choose a Type: Media
    There can experiment with headphones . Explain.
    I solder myself big headphones for comfort and a more or less high-quality listening.
    In principle, I can not listen to music in different Gag ( and other types of vacuum )
    Therefore, the levels of 4 to 6 exhibited quite large and they are well suited
    to my headphones. I recommend to put these levels ( 4 to 6) individually , by "spear ." The main thing
    the sound in your headphones do not pereusilyalsya , thereby delivering a shock ears.
    Level 0 - 0 -> Set
    Level 1 - 50 -> Set
    Level 2 - 90 -> Set
    Level 3 - 130 -> Set
    Level 4 - 160 -> Set
    Level 5 - 200 -> Set
    Level 6 - 255 -> Set

    We leave to the previous menu and choose
    LoudSpeaker Mode ( speakerphone)
    According to the parameters that were originally put up , you hear a bad thing, you can hear normally.
    Therefore, we will only change the value of the microphone.
    So, we change.
    Choose a Type: Mic
    I give two options to test :

    first sparing
    Level 0 - 100 -> Set
    Level 1 - 120 -> Set
    Level 2 - 140 -> Set
    Level 3 - 160 -> Set
    Level 4 - 170 -> Set
    Level 5 - 190 -> Set
    Level 6 - 210 -> Set

    Second - perhaps with a little overdrive
    Level 0 - 190 -> Set
    Level 1 - 200 -> Set
    Level 2 - 220 -> Set
    Level 3 - 230 -> Set
    Level 4 - 240 -> Set
    Level 5 - 250 -> Set
    Level 6 - 255 -> Set


    Good Luck! :)

    השבמחק
  11. תגובה זו הוסרה על ידי המחבר.

    השבמחק
  12. HELP-מי מכיר את הבעיה שהוויז לא מתחבר לבלותות' בסמארטפון

    השבמחק
    תשובות
    1. מה הקשר בין waze לבלוטות'?

      מחק
    2. בבקשה עזרה, קניתי טלפון סיני של haipa הבעיה כאשר אני מעביר שיחה לרמקול נשמע ציפצוף עד אשר אני מוריד את הווליום כמעט לסוף.

      אודה לעזרה מה לעשות.

      מחק
  13. אתה צריך להיכנס לspeaker mode ולהוריד שם את הווליום של המיקרופון - ככל שאתה ברמת ווליום גבוהה יותר, המיקרופון צריך להיות חלש יותר כדי שלא יהיה את הפידבק שאתה מדבר עליו.

    השבמחק
  14. ראשית תודה,

    שנית, די הסתבכתי עם ההגדרות - עכשיו אין צפצוץ אבל האדם שמדבר שומע הד נוראי, מישהו יכול לתת לי את ההגדרות הנכונות של הרמקול והמקרופון?

    השבמחק
  15. תנמיך עוד. אין לי מושג מה ההגדרות שמתאימות למכשיר שלך.

    השבמחק
    תשובות
    1. נכנסתי דרך האליקציה ולאחר השינויים ולחיצת SET זה רושם שהשינוי הצליח אבל בפועל השינוי לא נשמר ואני לא מזהה הבדל בעוצמת הצלצול. יש לך רעיון לפתרון?

      מחק
  16. מישהו מצא דרך לשמור את שינוי ההגדרות? אני לא הצלחתי. ההגדרות לא נשמרות. והשמע גם של האוזניה וגם של הרמקול חלשים מאד אצלי.

    השבמחק
    תשובות
    1. שלום שמוליק!
      האם יש לה פתרון לבעיה של שמירת הנתונים?
      כי גם לי זה לא שומר
      תודה!

      מחק
    2. נראה לי שיש אי הבנה: אחרי שאתם בוחרים level מכניסים ערך ולוחצים SET, זה עושה שינוי בערך של הlevel הזה. עכשיו כשתיכנסו שוב למצב מהנדס, לאותו Mode, לאותו type, ותבחרו את אותו level ששיניתם, יהיה בו הערך שהכנסתם קודם. אם לא, כנראה שהאפשרות לשנות את זה מוגבלת בטלפון שלכם.

      מחק
  17. שלום לכולם,
    הזמינו לי מכשיר סיני ומשום מה לאחר יום רמקול השמע לא עובד. שומע רק דרך אוזניות וספיקר.
    בפנייה לספק נשלח לנו לינק לצריבת הקושחה וגם זה לא תיקן את הבעיה.
    יש למישהו מושג כיצד ניתן לתקן זאת?

    השבמחק
  18. סוף סוף שומעים במכשיר! תודה!

    השבמחק
  19. אחרי שסידרתי את השמע, ועוד כמה תקלות, התחילה תקלה חדשה: כשמגיעה שיחה, ברגע שאני עונה, נשמע צפצוף, הקליטה יורדת לאפס והשיחה מתנתקת. כנ"ל קורה כשאני מנסה להוציא שיחה.
    כל שאר הפונקציות עובדות כרגיל: אסמסים, אינטרנט, אפליקציות.
    מה זה יכול להיות?

    השבמחק
  20. יש לי מכשיר ulefone יישנה בעיית התחברות לרשת הסלולרית ניסית להתחבר מול החברה וגם החלפתי סים לפי המלצת הספק וזה לא הצליח האם מישהו מכיר את המכשיר הנ"ל ואו את התקלה הזו

    השבמחק